Posts made by ramimoujaes

Greetings @ambrogio ,

-So all I have to do is to simply add 1 to group# to all if position, buy pending order, sell pending order, no pending order, position closed buys, position closed sells? Is that correct?

-Also, I see that you have added close positions, should I add that too? If yes, what block number should it be?.

If you can please provide a shared folder with the demonstration of what you said above that would be great. So, that I can mimic what you have done on my builder.

Thank you so much

Greetings @ambrogio ,

Thank you so much for helping me. I just have, hopefully one last and final question/adjustment to make.

I think the EA worked. I just have one last and final adjustment to make. The entire EA is great. Just one small minor adjustment. The adjustment is when the pending order transforms to an actual order, I want the actual order to simply close whenever the position opened by the "Old EA" closes it's opened position.

Right now, when the pending order transforms to an actual order, the condition to when should the actual order close is defined by Stop loss and Take profit. I want to adjust that. I want the actual order to simply close whenever the "Old EA" closes its opened position.

Please, if you can visually show me such as a shared folder how to do that, it would be great!!

Your cooperation and assistance is always highly appreciated

Sincerely

Greetings @ambrogio ,
Thank you so much for assisting me. I can not thank you enough.
I hopefully have only one last question. Can I apply it on two charts, EUR/USD and EUR/JPY? or will I have to place one on EUR/USD and for the EUR/JPY, I will change the pairs input from EURUSD to EURJPY, such as the below image:

Sincerely

Greetings @ambrogio ,

Thank you so much for assisting me in building the EA. I am just need a little bit more help.

1. May you please visually tell me what to do after placing position closed.
2. Do you care to check if the settings for position closed are correct please?
   

Shared Project: https://fxdreema.com/shared/eDIcWYT6b

Thank you so much, you are the man!

Greetings @ambrogio ,

Thank you for your earliest response. Regarding for the first point, I am not sure if I have done it right, do you care to check if I did it right?

Regarding the second point, can not find "Trade closed", do you care to point it out?

Shared Project: https://fxdreema.com/shared/hWQheUGjb

Sincerely

Greetings @ambrogio ,

Thank you so much for your earliest response.

I have an adjustment question in relation to your answers.

1. What if I only want 1 pending order for every position opened by the "Old EA". How do we do that. See, previously, you said that if the pending order created by the "New EA" became an actual order then another pending order will be created by the "New EA". I do not want that. I only want one pending order for every position opened by the "Old EA" .
2. Regarding closing the position, as we spoke earlier, when the “Old EA” opens a position, then the “New EA” will immediately open a pending order. If the position opened by the “Old EA” went straight to T/P, and the pending order did not become an actual order, then simply close the pending order. How do we do that?

Your cooperation is highly appreciated

Sincerely

Greetings @ambrogio ,

Thank you for your response. I just have two small questions:

1. Based on the image above, the "New EA" will open only one single pending order, correct?
2. In the image above, if I did not specify EUR/USD, will it then work on all currencies?

Shared Project:

https://fxdreema.com/shared/sdp0Q2itb

Sincerely

Greetings @ambrogio ,

I am so sorry, I think I may have misunderstood. Are you saying the above image is how to create the New EA?

Sincerely

Greetings @ambrogio

But I don't have the New EA. I want to create the New EA.

Sincerely

Greetings @ambrogio ,

I dont understand, kindly elaborate

Sincerely

Greetings,

The "Old EA" was purchased from mql5 market, and unfortunately, I do not have the source code.

Sincerely

Greetings @l-andorrà,
no Just the New EA, I already have the old EA running

Greetings @l-andorrà,

It is MT5 platform.

Question:
"Will there be any other EAs running the the MT4 at the same time (no matter in that or any other symbols)."

Answer:
No

Your earliest response is much appreciated.

Sincerely

Greetings,

I need to create an EA, in this case, we will call the EA that I want to create "New EA"

1. The "New EA" is what I will be creating, the "Old EA" is what is running 24/7 on multiple pairs (more specifically EUR/USD & EUR/JPY, on a M1 chart). The "New EA" in this case will be placed on EUR/USD & EUR/JPY chart separately. The job of the "New EA" is to place ONLY 1 pending order for every position opened by the "Old EA" related to a specific currency. The pending order shall be placed when the market has moved in the opposite direction by X amount whereby X is an adjustable input.

2. When the "Old EA" opens a position, the "New EA" will open a pending order accordingly (if "Old EA" placed a sell position, then the "New EA" will place a sell limit position and vice versa for a buy position)

3. The "New EA" must have adjustable lot size inputs

4. In terms of when should the “New EA” close positions, it should close pending order simply when the “Old EA” closes it's opened positions. The same goes when the pending order becomes an actual order. When the pending order becomes an actual order, then simply close the actual position/order when the opened position placed by the "Old EA" closes.

*Kindly note that when I place the "New EA" on a specific currency, it should only work with opened positions placed by the "Old EA" related to that specific currency.

I understand that this is a lot to take in, and I will be very glad to
explain anything that seems to be unclear.

• I do not have a project started yet because I do not know how to start.

Thank you so much for your cooperation

Greetings,
Thank you for your response.
If I am trading multiple charts, would I have to place this EA several times, or only once?

Greetings,
I have a small question. How do we create an expert advisor, where it only checks all opened position price, and then checks where has the price has currently reached. If there is a difference between 100 points (in-profit), then set SL or break even point to 50 points (in-profit) on the opened positions. So essentially, for every 100 points gained, 50 points is set as SL in terms of gain, I am not sure if I said it right.
I do not have a project opened or ready because I do not know how to start

Greetings,
I would like to my expert advisor to be multicurrency. If I am not mistaken to trade in all the pairs found in the watchlist. How do we do that in MT5?
Kindly explain in full details
Shared project:
https://fxdreema.com/shared/QC2aYvpmb

Greetings,
I bought a custom indicator, and I would like to import it in order to build an EA around it.

However, I only have an EX5 file.

Obviously it won't read it.

Is there something I can do about it

Greetings,

I don't mind paying

Greetings,

I am trying to create an EA but I am unsuccessful, would.anybody be interested in building one for me:
I need an EA (Expert Advisor) that is a multicurrency. The EA (Expert Advisor) should be 100% adaptive. The EA (Expert Advisor) should be based on price-movement, trend-following, and pullbacks. If the EA (Expert Advisor) has lost a specific trade (in which the account has experienced a loss), then the EA (Expert Advisor) must recover the loss that has been previously experienced.

The EA (Expert Advisor) should be able to steadily grow the account on a monthly basis by an estimate of minimum 10% - 25% using it's default settings.

*If possible, I would like to adjust how aggressive the Expert Advisor can be.

The EA (Expert Advisor) will be placed to the test through historical data, using different time periods (Strategy tester/Backtesting)

If there is anything misunderstood, please do tell me