I know hedging isn't very popular but I can't find an example of what I am trying to achieve.

I want to achieve the following:

Enter long with 30 pip TP and no SL
Enter short (hedge) if long trade 100 pip unrealised loss with no TP and 20 pip SL
If hedge trade is stopped out but long trade doesn't reach TP then enter a further short (hedge) if long trade once again 100 pip unrealised loss.
Enter maximum of say 5 short (hedge) trades
If after the 5th short trade is stopped out then the long trade either reaches TP or if it again reaches 100 pip unrealised loss then close long trade

Once the long trade is closed then start the sequence again. I can get the first sequence to work as per here shared/BMdZcsVxc but can't get the second one to work.

https://fxdreema.com/shared/BMdZcsVxc

Anyone able to help?

Thanks

@josecortesllobat said in Compiling?:

@SydneyFox

1. Check out if the constant/variable you want is set as "boolean" in the Constant/Variables menu

2. Might be related to 1 if it is the same constant/variable as you want as boolean

You fixed it again! Thanks!!!

Under type I had used 'boolean' instead of 'bool'. Sorted now.

Thanks you very much for all your help. @josecortesllobat @roar

Thank you very much for your reply. I really appreciate it as there's not a lot of help on here.

Your suggestion makes sense. I'll give it a go and see if I can get it to work.

Something like this?

https://fxdreema.com/shared/KsEp93Opc

Thanks @miro1360

I was able to get an EA to open trades when using standard indicators but not with custom indicators. I have now managed to get some to work which of course has led to more questions. But still not all are working?

Because I'm using downloaded data, say for the period 1 January 2016 to 31 March 2019. If I am using a 50 period MA then the test needs to run for at least 50 days from 1 January 2016 before the 50MA provides a calculation. I assume what I need to do if wanting to test from 1 January 2016 is to download data from say 1 January 2015 so that I have previous history for my indicators to use in their calculations?

What I really don't understand though is the following:

• When running a test from 1 January 2016 using a custom indicator that requires say 50 days of data to make a calculation. The tester shows no transactions for the whole period of the test even though the indicators should meet the condition for a trade in say August 2016 (and many more after this date).
• But if I run the test with a starting date of say 1 July 2016 then the August trade (and ones after this date) are taken by the tester.
• Why should it matter what date the test is run from?
• And it doesn't necessarily work if I start the test from exactly 50 days after 1 January 2016 or for the next X number of days but then starts working when I start the test from some undefined (seems to be undefined to me) date after 1 January 2016.? Is there any logic I should be looking at to see why this is the case?

Also, this happens on both Dukascopy data and metaquotes data.

Thanks @miro1360 for your reply. Replacing the once per bar block with your custom code has fixed the error I was getting. I have another issue with it now.

When running the EA I now get no trades taken. The only thing I have done is to replace the once per bar blocks with the custom code. When I run the test in visual mode, and the test completes, my custom indicators are not shown on the screen. Whereas when I run the test using the EA with the once per bar blocks and the test completes the custom indicators are shown on the screen.

Test with custom code:

Test with once per bar blocks:

This shows Spearman, Damiani, HA Candle indicators. These are in both EAs.

Is there any reason why the change to custom code would impact on using custom indicators? What do I do next?

I have tried another EA that I made. This time not using custom indi's but still get thge same error message. The line in the code I think it's telling me where thye error is i.e. 707 is as follows:

This line of code is the same in both EAs that have the error message?

I am getting an error when trying to backtest fxDreema EAs when using downloaded Dukascopy data.

My EA tests on the broker/metaquotes data but not on Dukascopy data. The mt4 inbuilt EAs, MACD Sample and Moving Averages both work so I can't see that it can be a data issue. As the EA works on the metaquotes data I can't see that my EA has a 'critical error' as the journal says.

I have searched fxDreema for other similar errors. It appears that they are happening when using Dukascopy data. But there doesn't seem to be any explanations given?

@fxdreema @miro1360 Do you have any explanation? Or solutions for me?

Do any other users test with Dukascopy data? Any solutions or suggestions for me?

@willstar44 This should give you anytime the indicator is not magenta. Not a change in colour.

What ambrogio suggested should also work.

I often struggle to get these change of colour indicators to work.

You could try having two condition blocks:

1. CandleID2 = magenta
   and
2. CandleID1 != magenta

Therefore when it changes from magenta to another colour it should buy/sell. At the moment it would perform the task on every candle where colour != magenta.

If you attach a link to your project someone may have a look at it for you. Hard to help without seeing the blocks.

In the condition block change the '>' (Is above) to 'x>' (Crosses Above)? https://fxdreema.com/shared/nReiXcWpc

If you have a look inside the No trade blocks you will see that there is a condition used in each of them.

The one in the row above the Buy now block is looking to see that there are no buy trades open. i.e. there can be sell trades open.

The one in the row above the Sell now block is looking to see that there are no sell trades open. i.e. there can be buy trades open.