Hi! The Winding 2 if you go to mql5 that are the creators of MT4 and MT5 you will see that they are not compatible without a low level programming or rather, they are not directly supported in mql4 or mql5, with this said think that fxDreema is based exclusively on mql4 or basic mql5, it does not provide libraries or DLL, it is the only way to apply them. I hope I've helped.
@william29 Hi @william29! As @l-andorrà says, if you do not explain yourself better it is impossible to understand what you are saying, first hang up the project link and indicate which block you are referring to otherwise it is impossible to help you since I think I understand your idea (I have a panel that makes use of horizontal and vertical lines and I have no problem) otherwise it is how they say in Spain "Give blind sticks".
@andrew-8 Hi @andrew-8! What you comment may be for several issues, first, is your EA made with fxDreema or otherwise? If it is with fxDreema, it would be good to hang the EA link to verify that you do not have something activated to differentiate the EA in demo or in Real, if you have done it in another way, here in this forum you can hardly be helped, it is exclusive to fxDreema. On the other hand, do you have it in VPS or do you do it from PC? In the first case, what was said before in the second case, if you do not run it from a VPS it is very normal that it happens to you, I have carried out that test with several EAs of mine and the difference was exactly this:
Ah! I forgot, I have looked at those people BINARY.COM , the web apparently is very successful (very suspicious) but at the time of getting in to verify the regulations you get a lot of propaganda but no certificate from the current regulator or that they really are a financial chiringuito and for They do not present it, POSSIBLY THEY ARE SCAMMING YOU AND MAKING A MIRROR of your operations and you invest them so that you lose all your capital, 90% of Broker are financial bars or scams and yours has all the numbers.
@jaypapa123 Hi @jaypapa123! I have looked at your post and what you have commented is possible with a command called MYSQL that is specific to enter mql4 or mql5 code depending on the type of EA you do, but for my humble knowledge of mql4 (since I have passed the fxDreema to mql4, they are lighter and respond without errors like those of fxDreema) you are missing code in your mql expressions unless you already have a structure in fxDreema made but without seeing what you have raised in fxDreema it can hardly help you more, you could Hang what you have of fxDremma (not photo, link) seeing the structure and the code fragments will be able to help you more.
Hola @l-andorrà, estan probados y funcionando los tres, el EA y los scripts. Como ya te comente en otro post la diferencia entre Tick y Timer es la respuesta, que creo ya lo sabes y sobre si deberia o no estar en Timer, @miro1360 en su panel multiple asi lo tenia, inicialmente realice como el todos mis paneles sin conocimiento, pero ahora que empiezo a realizar mis EA en MQL4 original ya lo he entendido y es completamente valido, de hecho este EA y estos script los he realizado tambien en codigo MQL4 original y mi sorpresa ha sido la velocidad de respuesta y el tamaño del codigo, en una variación de 10:1 a favor del codigo original, ya que en fxDreema hay 300 lineas de codigo y una estructura de Arrays y bloques fijos que llenan los EA de basura y no hacen nada o a veces bloquean ejecuciones para evitar realizar EA o Scripts que llamen a funciones y asi realizarlos con mas de 10 bloques y obligarte a alquilar licencias. Cuando descubri esto me enoje muchisimo ya que es una politica muy sucia por parte de fxDreema para el alquiler de licencias. Te aconsejaria te mirases la programación con MQL4 no es tan dificil y es muy sastifactoria y tu que hablas Ingles perfectamente hay cientos de videos de formacion buenisimos.
@legitimate Hello ! If we do not see the EA we cannot help you, it is impossible for us to know what you have done or not and with what you comment is like saying nothing.
Hello! I know that around here in the forum someone asked how to do the lines of the operations as they appear in the Backtesting Window of the Metatrader, for those who are interested I share a panel with two buttons, one creates all the lines of operations completed of the PAR is active, and the other is to erase all that information (lines, arrows, etc). If anyone is interested, here is the link and enjoy it.
https://fxdreema.com/shared/DHRzveLGc
Ah! For those who want it as a Script, here I give you the Link of both buttons in script (naturally without the button, only the execution).
@leka-0 Before considering whether to do it in MQL5, you should ask yourself what platform you want to work with with your Brocker, since most of them have MQL4 and MQL5 and the languages are slightly different; MQL5 is more complicated than MQL4, although there are manuals and video tutorials on the Internet for both, for manuals at "https://www.mql5.com/en/docs" and for MQL4 at "https://book.mql4.com/ intro ". On the other hand, if your Brocker is Darwinex (Social) or in the future you want to go to Darwinex to audit your account, it is only possible with MQL4. To build "Indicators" of course there is no software similar to fxDreema, nor fxDreema to make Indicators, the Indicators and Scripts being the easiest to program with MQL4, since it begins to program with the Scripts, Indicators and finally the EXperts or Robots . I hope I've helped.
@leka-0 Hi @leka-0! If I understand it, your intention is that 2 lines are drawn when pressing the button, once the lines are drawn you move them where you want one to be the SL and the other the TP and that the TP indicates that the Ratio has Regarding the SL but without opening any operation, only information. I think that calculator already exists in Metatrader, I think it's called "LinesProfitLoss.mq4" this is the link: https://www.mql5.com/en/code/16346 or https://www.mql5.com/es / code / 13330, think that in MQL5 there are more than 1000 indicators, scripts and EAs open and a forum that helps much more than this, besides that they are made with MQL4 or MQL5 (to choose) all the indicators, scripts and EAs that against fxDreema the codes are of the order of 30% against fxDreema which is faster and does not block. I have been studying MQL4 for a week because I am tired of fxDreema not helping and its EAs in a short time 24h / 48h peten and are not functional due to the immense amount of crap that is inside, I have made a small EA in fxDreema with only one button and this same EA in MQL4 and the one in fxDreema had 5850 lines of code and the one in MQL4 only 350, let me explain fxDreema of so much crap that it took 5 times longer to run against the one in MQL4 which was instantaneous, I advise you to Look for MQL5 what you need and if you don't find it, it is better and reliable to learn MQL4-5 than to do it with fxDreema, it takes practically the same time to learn both and the latter is free and has no limitations, only yours. It took me 1 year and € 90 to realize that fxDreema is useless and none of those that do the same as fxDreema and more expensive, where direct programming is, the rest is useless.
Hello @fxgjg! Look at this post, especially the last one since it is from the creator of this soft and it will clarify many things and what I have already told you about RENKO with fxDreema. Ah! For your information, the RENKO system apart from doubling the Windows, each RENKO window weighs approximately 3 times a normal one with two or three basic indicators, both MT4 and MT5 (I have tested it) and if you have more than 5 PAIRS or SYMBOLS even if you have a stratospheric PC it becomes very slow and each new PAR slows it down until it is blocked, another point to take into account, do a simple EA with a cross of 2 means and look for an EA from someone who has done it from MT4 or MT5 without going through Identical fxDreema, look at the mq4 of fxDreema and the external one and you will see that the one of fxDreema has a minimum of 3000 lines of code against the other that does not even reach 300, this both MT4 and MT5 notice it a lot and if you add it to The above mentioned you will see that you will not get anything, I have already tried it and I had to forget the idea.
https://fxdreema.com/forum/topic/5347/renko-patterns-drag-n-drop-into-ea-database/5
Hola @ajmd97fx! Mirate esta foto:
Como habras visto los cuatro grupos son identicos desde el 2º bloque hasta el bloque de Buy now/Sell now que es el que varia, en esta otra foto indico como podria ser:
Con un bloque de funcion y otro bloque de llamada o ejecucion de una funcion en otros lenguajes de programacion reducirias en este caso a una 3ª parte el tamaño del EA y triplicarias su velocidad ya que MT4/MT5 no tendria una EA de tanto tamaño y seria mas liviana y rapida de ejecución.
Es a esto a lo que me refiero, referente a la funcion de ejecucion de un programa (Script o otro EA) externo, ya me respondieron de que no era posible aunque en otro foro de MQL4 me han dicho lo contrario, creo que es para evitar que los EA,s sean de tamaño inferior a 10 bloques y asi obligar a la gente a que pague por la licencia con EA,s o Scripts de mas de 10 bloques, pero es complicarnos la vida a los usuarios y putearnos con algunos EA,s que por su peso y limitaciones no se ejecuten bien. Por eso ahora me he planteado estudiar MQL4 (Ya me he bajado 15 videos para estudiarlo y el manual del MQL4) pero de momento hasta que no sepa programar en MQL4 estoy buscando alternativas con fxDreema ya que tengo licencia para 6 meses.
@pontedruse Thank you very much @pontedruse!
Hola @ajmd97fx! Muchas gracias por las respuesta y tranquilo que con el COVID-19 todos estamos igual. Referente a lo que comentas de lo del "if" etc, en realidad no puedo decirte el que, ni porque ya que si lo miras en profundidad esto esta sacado y realizado por @miro1360, con lo que se escapa de mis conocimientos del "el porque", no he probado quitarlo pero como no voy a perder nada lo probare. Hay un punto que no se y me he planteado muchisimo, de hecho voy a colgar un post con esta incertidumbre; en Visual Basic, Java, etc. existen unos comandos exactamente el GOTO y CALL, que cuando tienes una cadena de ejecuciones que se repiten puedes realizar un procedimiento estandar y cada vez que debas hacer esto utilizas el GOTO o el CALL para llamarlos y ejecutarlos, incluso este ultimo para ejecutar programas externos. Desconozco y me extraña que en MT4 y/o MT5 no existan y que en fxDreema no lo haya tampoco, si por casualidad lo sabes, seria un puntazo me dijeras como, asi podria reducir a la mitad los EA,s y serian como minimo el doble o triple mas rapidos y pesarian menos.
@fxgjg If you browse the fxDreema forum, you will see that there are only two or three specific posts for RENKO and none have given solutions, just as the ichimoku fxDreema has huge gaps for these issues, I would say more than Oceanos lagoons. I would consider it, is the RENKO worth it? to everyone who have been for more than 2 years they have left, there are better systems (Alien, Nihlist, etc.) they have been working for 6 to 8 years and giving great benefits, they even have scanners and robots with benefits, there are specialized forums for those strategies with more than 1000 posts and daily entries.
@l-andorrà Con la configuracion que pone en la foto es posible que funcione pero no en el panel que he colgado para probarlo.
Hello @l-andorrà, how can I then obtain the coordinate point of BE0 or price to be able to apply the formulas?
@jstap Look at this link, it can help you too.
@jstap Let's go in parts:
1st The button you can create the first one that is created when the Chart is opened in On Init, On Timer or On Tick, the difference is:
a) on Init = It is normal, or when you create an array.
b) on Timer and on Tick = the difference between these two is the response time, since in on Timer it will perform the visualization after the calculations according to the stipulated time configured and instead in on Tick it performs the calculations and when they are They are finished, they wait for the next Tick to visualize them, if a tick is 5 min. It will take a minimum of two ticks to display, one for calculations and one for viewing.
2nd True when you press the button, the state changes and you can control it with a state block and a variable.
3º Naturally the condition buttons are for that, verify that the condition occurs and execute the next block after it.
4th Yes, but to leave it in the initial state and repaint, you must place the same block as the "Draw button" button, etc. at the end of the tree or it remains activated, if by mistake the latter has a different coordinate when the whole group has been created you will see that the button has been moved, this trick I use to see if the whole group has been executed or it remains blocked for some error and when I see that it works I put the same coordinates of the button that is drawn first.
Do not put a "pass" block at the beginning of the button. This photo is a standard sequence of a Button.
As you can see, of the four cases only the information button group has the "pass" block and they do not have a start button in "on Init", instead the other three types have a start button in "on Init" in Timer or Tick they have either with the MQL4 block or Select Button they have the starting one in Init, the selection and at the end the same starting for the closing, I have learned all this by testing and with the help of the forum, I hope it serves as a summary and guide. Maybe there is some wrong concept and some expert of the forum corrects it but as an explanatory guide I think it will help you.
@william-3 I am not an expert either, although it took time and more than Robots I use it to make panels, since Robots or EA, s of fxDreema (fxDreema is the best) as we say in Spain "Fall more than a shotgun of cane" and Manual strategies that give you a 15-18% profit in fxDreema does not exceed 10% and duplicates the false entries and half the good ones, so it does not give me any confidence.