Posts made by XYON126

@didymario7 Share it if you think it is convenient for me or someone else with more knowledge to help you. The information to help you is essential.

@jose-labay Hola José! Yo soy tambien de Barna, he utilizado mucho el ICHIMOKU y por lo que comentas creo que tu idea es realizar una EA con la estrategia Kumo-Goichi, si es asi lo primero debes de tener en cuenta "MUY IMPORTANTE" que fxDreema con el kumo goichi hay grandes lagunas, el hacer nubes es imposible, yo consegui algo parecido utilizando la Span A y la Span B preguntando si era mayor o menor que, la una y la otra y asi obtenia el tamaño de la nube, otro problema es que hay MA,s del ichimoku estan adelantadas o retrasadas varias velas , eso lo debes de incluir en la ID de la vela o no te funcionara. Di exactamente que intentas hacer y posiblemente te pueda ayudar ya que he realizado muchas EA de Ichimoku.

@didymario7 Hello @didymario7, I am attaching a link from the EA, take a good look at it, I have found several contradictions and a different lot in two sites that as you have not indicated "why" I have unified it but the idea already works for you. I tell you about mistakes:

1st The Trailing Stop always goes as I have put it, it never hangs from the SELL or BUY block as well as the Breakeven, etc.
2nd The filter of time everything at 00:00 is to consume blocks that do nothing.

3º When you want to modify values ​​continuously, the solution is always with variables.

Well I hope I have helped you and serve you, I have done a baktesting to H1 and you get a Profit facto higher than 3.5 (very good) I suppose that is your strategy!

https://fxdreema.com/shared/sLM3anxDd

To obtain the EA with variables and modifiable, what you must do is open the link and when you have it open you save it as mq4, once saved you can open it by importing it from where you have saved it and you will have it 100% accessible.

@miro1360 OKAY! Thank you very much, with this I have analysis and learning for a long time and I will be able to finish (I hope so) my operations panel, I will not tire of thanking you, you are a crack, I think that without you fxDreema would not be successful. Thank you very much and I am at your service as much as I can.

I will inform you about how my super panel is going, rather your super panel since 70% is thanks to your code, the other 30% my adaptation I have an idea of ​​the panel. If you want when I finish it and add all the adapted code that you have taught me, I will share it with you.

@miro1360 Thank you very much @miro1360. If I understand everything, please correct me!

1st With this code what you do is move the buttons off the screen with the variable "xxofset".
2nd To all the buttons that I need to hide you add the variable "xxoffset"
3º You create two more columns of buttons the "BE" and the "50", I understand that with the "BE" when it is pressed if the green color is active and the "50" I understand how far in% of the SL it should be so that when you press the blue button "BE" you made me Break Even, being able to modify the percentage of 50 in the button and if instead of percentage you want pips, you only have to change in the BreakEven block to "Fixed values".

What I don't understand is what the "xoffset" variable is for, it was already at the beginning, but what does it do? since by varying the value of X the button was already separated from the one next to it.

@miro1360, Sorry one question, is it possible with a show / not show button multiple buttons that are in a specific area? That is, suppose that all the buttons of the information of the operations were like a single button, they were in a specific area of ​​the complete set; and you need to hide them at the same time (that area) because they bother your strategy and analysis at that moment and then, for example at 5 min. you want them to show up again. Is this possible in fxDreema?

This photo is an example of what I consult, this panel is the one I have made with your help, the "show / No show" button is naturally now drawn on top, it is not real.

And finally, it is also possible in fxDreema to make a button that allows me to execute a BreakEven of the active operations in the active PAR of all positive operations, or is it only possible to do BreakEven in operations of a specific strategy, example this photo?

@homemebel Is this what you mean?

If so, it is as I indicated in the photo, the candle ID goes from ID 0 to the current candle to ID 3, which would be the 3rd candle before the current one, that is, 0,1,2,3 towards existing candles and 0, -1, -2, -3 towards future candles.

@yader-mayorga I think I understand that what you want is to open orders with a fixed Take Profit, if so, here is an example of a SELL opening with a Stop Loss of 20 pips, Take profit of 50 pips and a lot of 0.1 lots:

pressing the arrow opens more options in the three cases SL, TP and Lots, on the contrary, if you want it to be variable, what you should do is create variables and conditions and formulas to modify the variables and the variables are entered by selecting the option box at the same time q pressing the right button of the mouse and a window will open with all the variables and constants that you have created, select the one you need and it will be applied to you; You can do it as complex as you want and need, but that already comes in with programming blocks, etc.

@ghq I just read another post of yours about the payment, be careful, possibly if you have several users in fxDreema you are still opening another user different from the one you have made the payment and here if you have a problem since it is still active in the payment user (they are incompatible , the payment is not transferred to all your users, only in one) and from the first day of payment it has already been activated and you will have run and spent the days from the initial day until today and if more than a month ago you will have lost it and I do not know the possibility of return if it has not been used, since it is not the fault of fxDreema but an error of yours for opening several users and not controlling where you make payments. I do not think that anyone in the forum has more than one user because I consider it to be an error and it can give you problems with payments.

@ghq If what you had paid was a month do not worry, I would take another month and surely that when the administrator reads your emails from the bitcoint he will automatically add it and add it, what if I know from other colleagues than all those who have hired like me with a Card has been immediate, the other methods I do not know the reason usually take and many have complained and I do not think it is fxDreema but the entities that process it, I with Aliespres and Amazon if I do not do it with a Card I have insurance problems.

@esmarkets-0 This block thus indicates that the RSI must be greater than its level 20, if you want it to be lower change the > by <, if what you want to cross the level 20 from top to bottom it should be this x> and the opposite with the x <

for the level of 80 this would be the crossing from bottom to top, etc, etc.

I hope I've helped.

@khalids222 The block "once per bar" number 29 and 30 go above and not after the blocks of "condition" 13 and 11 (also change the block number since they must be less) or this is how they have taught me here in forum.

@khalids222 With this block you can control the earnings, but as @l-andorrà andorra indicates share your EA and we will know exactly how you want it, so in writing the information is very diffuse.

@miro1360 Good advice, thank you very much, I usually practice it and advise the same myself, where is the experience and the years.

@ghq Hello, @ghq I have made two purchases, the first of a month and the next of 3 months, regarding the payment, I always do it via credit card, with Pay-Pal tube hacker problems and they were not responsible for what I unsubscribed them and never again with Pay-Pal and even less with cryptocurrencies, my daughter's boyfriend was stolen the equivalent of € 3000 and he could not get it back, so I redeemed them and according to him, never again; so where the cards are there is nothing else. By the way, the response was instantaneous, fxDreema opened my account and the card had not been charged yet although the € blocked were pending confirmation.

This is what I can tell you, about how to get in touch, this
@l-andorrà or another person from the forum with more experience and years in fxDreema will inform you better.

@fideld003 Hello, Yes and no to your question if it is paid. If you can create functional EA and Scripts and that functions 100% in demo and real accounts always as in the fxDreema trade section indicates, the free option allows you to save a maximum of 30 programs (EA and Scripts) as max. and create EA and Script but with a premise, the total of blocks (those colored icons with a number in front) must not exceed in total (all the tabs joined) the amount of 10 blocks, that gives you play for many EA simple but when you start doing EA something complicated you can create it but you can not compile it that is to say remove the "mq4 or mq5 and less the ex4 or ex5" for that you must hire the monthly, quarterly service, etc.

Looking at your EA, right now you have 17 blocks in "on Tick" so if you don't hire a minimum of one month it will be impossible for you to get the mq4 and ex4 or mq5 and ex5 files; on the other hand I see that you use several blocks "Bull cadle" and "Bear cadle" controls the ID of the candles or it will give you an error, that is, you can get the EA (as long as it lets you tax it) but you will not get results in the MT4 Backtesting because it opens a time limit, I tell you from experience. I hope to have clarified issues and helped you.

You also have an option to test it, create another EA and copy in that EA only one operation, the SELL or BUY operation, eliminating everything from the other operation, that will add 10 blocks, you can try it and use it but only that option, I advise you hire 1 month and later as I think all packages of 3, 6 or a year do that will solve many doubts and you will be able to create almost everything.

@prometheus Hello @prometheus, if I have understood correctly, you want to obtain the exact moment of the closing of an H1 candle with that of a D1 candle, I do not know if you know that the closing of the candles is always done at the same time, there is no delay between M5, M30 ; H1, H4, D1 or whatever time frame it is, that is, when the D1 candle closes the H1 as well, which will never cross the H1 with the D1, another thing is the closing of the H1 in a period not of 24 hours (22, 15, 3, etc) and obtain that crossing in the one of D1, if so, confirm it, because everything changes radically.

@khalids222 Look at this Link at the end, it is a panel with many Mql5 formulas created by @Miro1360 and that have been great for me, in fact that panel I think does what you need or part of it.

@fm2020 Yes, if possible there are many panels with that structure, I have created several with the help of @miro1360 who is the true God in this, because without his help it had been impossible for me, see this link:

http://fxdreema.com/forum/topic/4501/video-tutorial-signals-dashboard-ea-advanced-looping-objects-arrays/42

It will clarify things for you or in my user the posts about panels, you will only have to extract what you need and apply it and adjust it to your needs, later when you have it raised and if it does not work we can help you.

@miro1360 Hello @miro1360, Yes, I was referring to Mql4, Mql5 I have been looking there and it is quite chaotic to find the use of code and how to use it in the fxDreema blocks for that purpose and that of Formulas or at least I have not been able to find it specifically Although you tell me that it is similar to C, C ++ and here I am already lost because I do not know that language completely and at 60 years old the will is high but the mental agility not so much. Thanks a lot.